Lisa jittery screens

From: Geoff Reed <geoffr_at_zipcon.net>
Date: Mon Dec 30 22:06:00 2002

At 09:18 PM 12/30/02 -0500, you wrote:
>I thought I'd add that the adjustments _do_ hold after the systems cool
>down. I ran the machines off and on during the week after the
>adjustments without a problem, even during extended on/off cycles - they
>just don't seem to hold very well over time.
>
>Jeff

I've had this problem on dec VR-201's, and it was usually due to bad
solderjoints getting worse, or failing resistors/caps in the vertical
section of the monitor.
Received on Mon Dec 30 2002 - 22:06:00 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:34:42 BST