How do you bring up a MicroVax 2000?

From: SP <spedraja_at_ono.com>
Date: Thu Aug 28 17:25:00 2003

Perhaps is a problem of the cable and terminal you are using.
I have one DEC cable with MMJ connector, and use one VT-102
or one Compaq Portable with Kermit using VT-102 emulation to connect
with the Microvax 2000.

Just curious... Do you have in the back of the Microvax one Box with
three MMJ connectors ? This is neccesary to connect with one Serial
Terminal (someone correct me if this is a mistake)

Cheers

Sergio


----- Original Message -----
From: "Joe" <rigdonj_at_cfl.rr.com>
To: <cctalk_at_classiccmp.org>
Sent: Wednesday, August 27, 2003 10:02 PM
Subject: How do you bring up a MicroVax 2000?


> What baud rate, parity, data bits do you use for these and do you need
to
> press any certain key to get the system to recognize the terminal? I have
> two of these. I tried to bring them up today. The closest setting that
> seemed to work was 9600 Baud, 8N1. But all I could get on the display was
> '||PPPP'. I got exactly the same from both CPUs.
>
> Joe
Received on Thu Aug 28 2003 - 17:25:00 BST