This could be a problem with your Connor HD, the ones
in the Grid 15xx are notoriously unreliable. Go to
http://groups.yahoo.com/group/RuGRiD-Laptop/
In the files section are set-up and boot disk files which
would allow you to boot from floppy and at least see if
the HD is recognized. If not you need to replace your HD
with one of the 3 the 1530 recognizes. There is also a file
to alter the BIOS to allow a larger Connor HD than the
biggest 80meg one to be installed.
I regularly give my 2 Grid 1520s a sharp rap or twist to
unstick the HD. :^) I haven't anything of value on it that I
can't replace with a backup and haven't yet found a cheap
Connor with the Grid specs. YMMV
Lawrence
On 11 Feb 2003, , Ricky wrote:
> Dear Sir,
>
> Greetings form Geolab! We are formed in 1991 as an
> independent multi-discplinary Geotechnical, Environmental
> and Construction Materials Service firm providing
> engineering and scientific consulting, subsurface
> exploration and testing services to both public and private
> sector clients.
>
> At this moment, we are using Gridcase 1530 (386) for the
> purpose of doing our Pile Drive Analysis Test (PDA Test).
> Due to this computer is an old unit, we frequently facing
> problem that bother us once we turn on the computer. The
> monitor always promp the error as stated below:
>
> "Invalid configuration Information : Code 02
>
> Strike F1 key to continue"
>
> However, once we strike the F1 key, another error will occur
> named, Disk Boot Errores.
>
> We really appreciate if you can help us out in this matter
> as soon as possible, this computer is really valuable for
> our department. We hope to hear from you soon.
>
> Thank you for your kind attention.
>
> Regards,
>
> Ricky
>
> Engineer
>
> ligkig_at_hotmail.com
lgwalker_at_ mts.net
Received on Thu Feb 13 2003 - 11:55:01 GMT