teledisk problem

From: Don Maslin <donm_at_cts.com>
Date: Fri Mar 14 00:47:01 2003

Damien Cymbal wrote:

>Anybody seen this one?
>
>I'm running into a problem with a set of disks (original Visual 1050 system
>disks) where when teledisk gets to cyl 80 it pops up an error box "Drive A: is
>not ready. Please correct and press any key to continue". Needless to say,
>nothing I've tried gets past this error. Teledisk usually seems fairly
>tolerant of most errors and will keep chugging, but not so in this case. I
>tried a few versions, the latest I have is 2.16, all behave the same.
>
>Any ideas?
>
>dc
>
>
>

It is a little unclear whether you are trying to create a TeleDisk image
file from the Visual 1050 disk or are trying to create a media copy from
a .TD0 file. In either case, may we assume that drive A is a 96tpi 5.25"
drive and that you are in DOS and not in a DOS window?

Give us a bit more to go on and perhaps someone can help you.

                                                - don
Received on Fri Mar 14 2003 - 00:47:01 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:12 BST