Teletype re-assembly...

From: David V. Corbin <dvcorbin_at_optonline.net>
Date: Sat Apr 24 15:07:05 2004

OK, I admit it...I am so confused...

I finally received a TTY complete with punch, reader, and call control a
little over a week ago.

Although it was damaged in shipping.
http://www.dynamicconcepts.us/Teletype/BrokenCover1.JPG
Every thing except the cover appears in good shape.

I have all of the documentation (I believe) is available from PDP8.net.

I have carefully checked it out mechanically and (non-powered) electrically
as best as I am able. The only question on this fromnt is one switch which
appears to be out of position, but I can
Not find a reference picture
http://www.dynamicconcepts.us/Teletype/Switch1.JPG

What I can not seem to find the documentation for is the interconnection of
the various Molex connectors:
http://www.dynamicconcepts.us/Teletype/Cables1.JPG

If anyone could spare some time to help walk me through getting this safely
powered up, I would be very grateful.

Thanks in Advance

David Corbin
david_at_dynamicconcepts.us


         
Received on Sat Apr 24 2004 - 15:07:05 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:30 BST