HP 7908/7912 head locking

From: Arno Kletzander <Arno_1983_at_gmx.de>
Date: Thu Dec 23 01:23:27 2004

On Wed, 22 Dec 2004 11:10:06, Al Kossow (aek_at_spies.com) wrote:
> I've put a scan of the 791x installation manual up at
> www.bitsavers.org/pdf/hp/disc/07912-90902_791x_Inst_Jun86.pdf

Many Thanks, Mr. Kossow! And all that quick!

This will no doubt enable me to prepare the drives for moving. I've pulled
this and the corresponding Service Manual down.

The machine wasn't run in the last few years according to the owner, so a
dummy-loaded PSU checkout seems to be in order. As an HP 1000 neophyte, what
other corners do I have to pay special attention to? (The Site Environmental
Requirements for Disc/Tape Drives say something about an absolute filter
that may have to be changed sometimes, but since the 7912 is said to use a
sealed drive assy. in the Service manual, I suppose this applies to another

Another time this list proves to be a magnificient resouce to me...
Yours sincerely

Arno Kletzander
Stud. Hilfskraft Informatik Sammlung Erlangen
+++ Sparen Sie mit GMX DSL +++ http://www.gmx.net/de/go/dsl
AKTION für Wechsler: DSL-Tarife ab 3,99 EUR/Monat + Startguthaben
Received on Thu Dec 23 2004 - 01:23:27 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:36:39 BST