RK05 stuff

From: Tony Duell <ard_at_p850ug1.demon.co.uk>
Date: Mon Jul 19 17:16:08 2004

> I then removed the M930C terminator card from drive 1 and
> put it in drive zero, removed the card that had the
> controller cable attached to it (M993 RK8E cable), and

I seem to recall (vaguely) that that card can assert one of the power
fail lines on the drive interface (there is a chip on it, after all) and
that this might well stop the spindle relay from pulling in.

-tony
Received on Mon Jul 19 2004 - 17:16:08 BST