On Fri, Mar 05, 2004 at 11:05:50PM +0000, Tony Duell wrote:
> DA26 : never seen it used
I have a Cisco AGS+ router (big box with, I think, Multibus slots) and a
quad low-speed (i.e., not 1.544Mbps) card. The connectors on the back are
DA26s and I have no cables. :-(
These are *not* the same as the newer Cisco cables with pins on a square
grid.
> DB44 : Ditto
I have a Planar-brand 486 with built-in flatpanel, internal 2.5" IDE drive,
one ISA slot, PCMCIA, optional onboard 10Base2 NIC, etc, with a DB25 external
floppy connector and a DB44 external IDE CD-ROM connector. I megged out the
floppy port and built a cable for it. Since I don't have any DB44 cables,
I never bothered figuring out the pinout for the CD-ROM.
-ethan
--
Ethan Dicks, A-130-S Current South Pole Weather at 06-Mar-2004 01:58 Z
South Pole Station
PSC 468 Box 400 Temp -60.1 F (-51.2 C) Windchill -60.1 F (-51.2 C)
APO AP 96598 Wind 3.1 kts Grid 129 Barometer 678.6 mb (10679. ft)
Ethan.Dicks_at_amanda.spole.gov http://penguincentral.com/penguincentral.html
Received on Fri Mar 05 2004 - 20:04:59 GMT