Paper Tape Punch

From: Keys <jrkeys_at_concentric.net>
Date: Thu Nov 25 09:58:03 2004

I can not find a part number for the interface pictured in the manual. The
write-up in the manual says "The interface assembly comprises a circuit
board with housing, a shielded cable and a plug. The circuit board plugs
into any 9800 series calculator I/O connector. The plug on the other end of
the interface cable fits into the rear input connector of the 9884A tape
punch."
----- Original Message -----
From: "Bob Shannon" <bshannon_at_tiac.net>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk_at_classiccmp.org>
Sent: Wednesday, November 24, 2004 8:04 PM
Subject: Re: Paper Tape Punch


> Adapter for which HP processor?
>
> For an HP 1000, you need an 8-bit duplex register board, but a 16-bit
> duplex register will also work.
>
>
> ----- Original Message -----
> From: "Keys" <jrkeys_at_concentric.net>
> To: "cctalk_at_classiccmp" <cctalk_at_classiccmp.org>
> Sent: Wednesday, November 24, 2004 9:08 AM
> Subject: Paper Tape Punch
>
>
>> Finally got my Facit 4070 Paper Tape Punch that I purchased last year
>> home last night. I got the punch and a HP 9884A Tape Punch Operating and
>> Service Manual and nothing else. Anyone have the adapter with cable for
>> this and some HP paper tapes (#9280-0229)?
>
>
Received on Thu Nov 25 2004 - 09:58:03 GMT