QBus termination?

From: shoppa_classiccmp_at_trailing-edge.com <(shoppa_classiccmp_at_trailing-edge.com)>
Date: Thu Feb 10 14:07:48 2005

Micronote #035 is the classic reference on this.




      The following MicroNote discusses the termination and expansion
      configurations which are SUPPORTED by Digital Equipment Corporation.
      These configurations will deal with 18 and 22-bit Q-bus processors,
      backplanes and enclosures. Not all cases presented in this MicroNote
      meet FCC regulations, and only those that do are so marked.
      The MicroNote is partitioned as follows:

           1. System configurations
           2. Single Box expansion/termination rules.
           3. Multiple box expansion/termination rules.
           4. Configuration/case reference chart.
           5. Supported single box configuration cases.
           6. Supported multiple box configuration cases.

See http://www.ibiblio.org/pub/academic/computer-science/history/pdp-11/hardware/micronotes/numerical/micronote35.txt for the whole article.

Tim.
Received on Thu Feb 10 2005 - 14:07:48 GMT

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:37:37 BST