11/45-1, Jay-0

From: Eric Smith <eric_at_brouhaha.com>
Date: Fri Feb 18 21:13:56 2005

Jay wrote:
> You mean I need both these voltages on every card that makes up the cpu I
> assume, so I need to check each of those slots pins. I did check the
> regulators directly, but I guess it's possible there's a broken wire not
> getting those voltages up to the backplane.

There's enough amps flowing through those cables that there can be
non-trivial voltage drop. You have to measure at the backplane pins to
make sure the voltage is in tolerance at that point.

Eric
Received on Fri Feb 18 2005 - 21:13:56 GMT