>I went through and read the docs on the ESDI controllers I got with the
>uVaxen and the Sigma controller has a built in booter for LSI-11 systems
>so it will boot an MSCP disk. Presumably I could boot either RT-11 or
>RSX-11 with that setup.
Keep in mind that because there is a standard location for boot code,
a controller which has its own on-board might conflict with a BDV
or REV board... boot code is normally located at 173000 with some
additional code at 165000.
You'll only be able to have one or the other, not both...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '_at_' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL:
http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+
Received on Mon Mar 22 1999 - 12:17:50 GMT