> And the IIci will handle a max of 128mb (8 - 16mb chips). You must
> install RAM in groups of 4 however (and I am fairly sure all ram in a
> grouped bank must be the same type, so either all parity, or all non
> parity)
It is also worth noting that with a full 128MB installed, the on-boot
RAM test takes a considerable amount of time, something like over two
minutes :-) My NetBSD IIci, even with a Daystar 50MHz accelerator, still
takes 'forever' to cold start with its RAM fully loaded out.
--
----------------------------- personal page: http://www.armory.com/~spectre/ --
Cameron Kaiser, Point Loma Nazarene University * ckaiser_at_stockholm.ptloma.edu
-- Everything is permissible, but not everything is expedient. -- 1 Cor 6:12 --
Received on Sun Jan 13 2002 - 23:23:01 GMT