KM-11 (was RE: help needed: problem with UNIBUS access on my PDP-11/70)

From: Ethan Dicks <erd_6502_at_yahoo.com>
Date: Thu Jul 11 16:44:01 2002

--- Tom Uban <uban_at_ubanproductions.com> wrote:
> > > http://www.ubanproductions.com/museum.html
> >
> >Nice pages. Had seen them before, but lost the URL ...

Indeed.

BTW, how much did that KM-11 replica PCB cost? I wish I
could find hobby-level PCB vendors that _could_ do
gold fingers, but for as much as that card would be used,
I can tolerate tin.

I have a TM11 and an RK11C that I'd love to stick one of
these onto. I've seen Tony's pages in the past, but never
worked up enough energy to do a point-to-point replica. At
least I do have a single-height prototype card or two, but
I was hoping to save them for, say, crystal-controlled
baud-rate generators for a PDP-8/L (to run a VT52 reliably at
a comfortable split 9600/150 baud rate).

Worst case, I do have some bare copper-clad board of the right
dimension (not sure about thickness without checking), but I'd
still miss the gold fingers.

-ethan


__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
Received on Thu Jul 11 2002 - 16:44:01 BST

This archive was generated by hypermail 2.3.0 : Fri Oct 10 2014 - 23:35:01 BST